H|H ~ The Hampshire Heavies Community : Forum
http://www.thehh.eu/forum/

Cant boot into windows on new setup
http://www.thehh.eu/forum/viewtopic.php?f=30&t=8448		 Page 1 of 1
Author:  Ares_CST [ Sat Mar 31, 2012 1:05 pm ]
Post subject:  Cant boot into windows on new setup
Long story short: Motherboard boots into bios goes to boot into windows, freezes, resets.
I originally put this down to the delivery man chucking my parcel over a 6 foot fence and sent them back. They tested and said the voltage controllers on the board were fried.
They have now sent out a replacement board and the same cpu and ram.

Installed it all and still getting the same error.

Updated bios, tried different memory configs with both dual and single lane. Tried 2 differnt operating systems of both a SSD and HDD in sata 3.0 and 6.0. Nowt seems to fix ought. IF anyone has any ideas ?
The stuff in question is Corsair 1600MHz RAM 1.5V rated Intel 2600k cpu and Asus P8Z68-V LX. Im literally trying to get it to boot nothing fancy like :P
Author:  Dirty Jesus [ Sun Apr 01, 2012 3:52 pm ]
Post subject:  Re: Cant boot into windows on new setup
An incompatible, faulty or incorrectly connected PSU (maybe) could have caused your old board's voltage controllers to be fried.

Worth double checking that I guess.
Author:  Ares_CST [ Sun Apr 01, 2012 4:53 pm ]
Post subject:  Re: Cant boot into windows on new setup
I'm using the psu now so its not particularly faulty :P And I'm just not sure whether thats really the actual problem :s
Author:  Gimpy [ Mon Apr 02, 2012 2:24 pm ]
Post subject:  Re: Cant boot into windows on new setup
I miss pilsy :(.......

Reseat everything try and guess boot with the min plug in.
Author:  frog [ Mon Apr 02, 2012 3:57 pm ]
Post subject:  Re: Cant boot into windows on new setup
Ares_CST wrote:
Long story short: Motherboard boots into bios goes to boot into windows, freezes, resets.
I originally put this down to the delivery man chucking my parcel over a 6 foot fence and sent them back. They tested and said the voltage controllers on the board were fried.
They have now sent out a replacement board and the same cpu and ram.

Installed it all and still getting the same error.

Updated bios, tried different memory configs with both dual and single lane. Tried 2 differnt operating systems of both a SSD and HDD in sata 3.0 and 6.0. Nowt seems to fix ought. IF anyone has any ideas ?
The stuff in question is Corsair 1600MHz RAM 1.5V rated Intel 2600k cpu and Asus P8Z68-V LX. Im literally trying to get it to boot nothing fancy like :P
Not sure exactly what the scenario is. Did you have a working PC running Windows, and then installed a new and different motherboard, and then tried to boot the existing Windows install? If so, then that is the problem. You are going to need to install Windows again.
Author:  StingerNpt [ Mon Apr 02, 2012 4:39 pm ]
Post subject:  Re: Cant boot into windows on new setup
In the absence of Bedizen on this topic I suggest you hit it with a stick.
Author:  Gimpy [ Wed Apr 11, 2012 11:25 pm ]
Post subject:  Re: Cant boot into windows on new setup
StingerNpt wrote:
In the absence of Bedizen on this topic I suggest you hit it with a stick.


Him and hes stick will be back.
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/